View DF3A-2P-2DS_247876.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
DF3 Series
sFeatures
Correspond to Board Design in Wide Variation
qID Socket (1) Low profile design with the mounting height of 6.8mm (2) Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID type. (DF11 series represents the 2mm pitch single-row product.Please refer to page A266 to A277.) qCrimp Socket (1) Low profile design with mounting height 7.5mm. (Please refer to the application pattern figure on page A256 for details.) (2) Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. qReceptacle (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. (2) For horizontal connection, the board to board size is the low profile of 6.6mm. (Please refer to the application pattern on page A256 for details.) (3) Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. qPin Header (1) The board pre-fixed kink is treated with the post pin. (2) The style employs a scoop-proof and sturborn box type. (3) The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. qIn-line Plug (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. (2) The in-line adapter is available to insert and in-line the ID socket from both sides.
sApplications
Business equipment such as copy machine and printer
A254
BEmbossed Carrier Tape Dimensions
Unit: mm Product Type Size Number of Contacts 2 to 4 DF3/3D-*P-2H 5 to 7 8 to 12 13 to 15 A 24 32 44 56 B --- 28.4 40.4 52.4 C 11.5 14.2 20.2 26.2 D 24.4 32.4 44.4 56.4
BPrecautions
1. Recommended Temperature Profile (SMT)
Note1: Maximum twice action is allowed under the same condition. However, the interval between the first and second actions must be maintained at room temperature. Note2: The temperature indicates the board surface temperature on the connector lead area. 2. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 29010c, Soldering time: Within 2 seconds 3. Recommended Screen Thickness (SMT) 0.15 to 0.2mm 4. Board Warpage (SMT) 5. Recommended Soldering Condition (DIP) 6. Cleaning Condition 7. Connection Condition Based on both connector edges, 0.03mm max. in the connector center portion sFlow Condition with Automatic Soldering Tool. Soldering temperature: 2505c, Soldering time: Within 3 seconds sManual Soldering Condition. Soldering iron temperature: 29010c, Soldering time: Within 2 seconds Refer to the "Nylon Connector Use Hand book". Refer to the "Nylon Connector Use Hand book".
A265
sProduct Specifications
AWG 22 to 24:3A Current rating Rating Note 1 IDC Voltage rating AC100V Crimping Wire size Press-fit: 250V AC IDC Crimping Wire size AWG 26 AWG 28 :2A :1A Operating Temperature Range -30c to +85c Note 2. Operating Humidity Range 40% to 80%
AWG 26, 28:1A Press-connect: 100V AC
Storage Temperature Range -10c to +60c Note 3. Storagg Humidity Range 40% to 70%
UL-CSA Safety Standard and Approved specification Rated Current Rating Rated Voltage Wire size 30V AC AWG 24 to 28: 1A
sUL CSA Safety Standard File No. UL :E52653 CSA :LR95109 sUL CSA Acquisition Objective Item 1DF3-*S-2C 2DF3/3A-*P-2DSA/DS 3DF3/DF3AA-*EP-2C 4DF3-*S-2R26/28 5DF3-*P-2H Condition
Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 5. Vibration 7. Temperature Cycle 1000M ohms min.
Specification 500V DC 650V AC/1 minute 100mA
No flashover or insulation breakdown.
30m ohms max
4. Single Insertor/Extraction Force MIN0.3N (30gf), MAX4.4N(450gf)
Measure by the square steel pin with 0.50.002mm
No electrical discontinuity of 1s or more
Contact resistance: 30m ohms max.:Insulation resistance: 1000M ohms min.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95%
(-55c: 30 minutes 5 to 35c: 10 minutes 85c: 30 minutes 5 to 35c: 10minutes) 5 cycles Tin plating: 30 cycles Gold plating: 50 cycles
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 500M ohms min. 8. Durability (Mating/un-mating) Contact resistance: 30m ohms max. 9. Resistance to Soldering Heat No deformation of components affecting performance.
Flow: 250c for 10 seconds Manual soldering: 300c for 2 seconds Reflow: At the recommended temperature profile Manual soldering: 300c for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Crimping Socket IDC Contact for Socket ID Socket Receptacle Pin Header Part Insulator Contact Insulator Contact Insulator Contact Insulator Contact Insulator SMT Pin Header In-line Plug In-line IDC Contact In-line Adapter Contact Metal tab Insulator Contact Insulator Contact Materia Polyamide Phosphor bronze Polyamide Phosphor bronze Polyamide Phosphor bronze Polyamide Brass Polyamide Phosphor bronze Brass Polyamide Phosphor bronze Polyamide Brass Finish Black Tin plated or gold plated Black Tin plated or gold plated Black Tin plated or gold plated Black Tin plated or gold plated Beige Tin plated or gold plated Tin plated Black Tin plated or gold plated Black Tin plated Remarks UL94V-0 ------- UL94V-0 ------- UL94V-0 ------- UL94V-0 ------- UL94V-0 ------- ------- UL94V-0 ------- UL94V-0 -------
Note:HRS's tin plating takes actions against whisker.
A255
sOrdering Information
qConnector
DF 3 - * S - 2C
q q Series Name w Series No. r Connector Type S P EP t Contact Pitch : Socket : Pin Header : In-line Plug : 2mm w e r ty : DF : 3, 3A, 3AA y Connection Form/Contact Style C : Crimp socket R26 : ID socket for AWG26 R28 : ID socket for AWG28 DSA : Straight through hole DS : Right angle through hole V H A : Straight SMT : Right angle SMT : Adapter
e Number of Contacts : 2~15
qContact
DF3 - EP2428PCFA
q q Contact Type NONE : For socket EP 22 : For in-line plug : AWG22 w Applicable Wire Size 2428 : AWG24 to 28 w e r e Contact Type/Packaging Type SCF SC PCF PC Blank A C : Socket contact, Embossed tape : Socket contact, Bag : Plug contact, Embossed tape : Plug contact, Bag : Tin plated : Gold plated : Gold plated
r Plating Type
sApplication pattern
A256
sID Socket
[Specific No.]-* *, (* *) Blank (01) (20) : Tin plated, 100 pieces per bag : Gold plated, 100 pieces per bag : Tin plated, Tube packaging
This picture shows the cable assembled status.
Note 1. Mark to determine the socket name Mark6: R26, Mark8: R28
qAWG26
qAWG28 Unit: mm Number of Tube packaging Number of A B A B Part Number CL No. Part Number CL No. Contacts Quantity Contacts DF3- 2S-2R26(**) 543-0078-7-** 2 6 2 190 pieces DF3- 2S-2R28(**) 543-0092-8-** 2 6 2 DF3- 3S-2R26(**) 543-0079-0-** 3 8 4 142 DF3- 3S-2R28(**) 543-0093-0-** 3 8 4 DF3- 4S-2R26(**) 543-0080-9-** 4 10 6 114 DF3- 4S-2R28(**) 543-0094-3-** 4 10 6 DF3- 5S-2R26(**) 543-0081-1-** 5 12 8 094 DF3- 5S-2R28(**) 543-0095-6-** 5 12 8 DF3- 6S-2R26(**) 543-0082-4-** 6 14 10 080 DF3- 6S-2R28(**) 543-0096-9-** 6 14 10 DF3- 7S-2R26(**) 543-0083-7-** 7 16 12 070 DF3- 7S-2R28(**) 543-0097-1-** 7 16 12 DF3- 8S-2R26(**) 543-0084-0-** 8 18 14 062 DF3- 8S-2R28(**) 543-0098-4-** 8 18 14 DF3- 9S-2R26(**) 543-0085-2-** 9 20 16 056 DF3- 9S-2R28(**) 543-0099-7-** 9 20 16 DF3-10S-2R26(**) 543-0086-5-** 10 22 18 052 DF3-10S-2R28(**) 543-0100-4-** 10 22 18 DF3-11S-2R26(**) 543-0087-8-** 11 24 20 046 DF3-11S-2R28(**) 543-0101-7-** 11 24 20 DF3-12S-2R26(**) 543-0088-0-** 12 26 22 044 DF3-12S-2R28(**) 543-0102-0-** 12 26 22 DF3-13S-2R26(**) 543-0089-3-** 13 28 24 040 DF3-13S-2R28(**) 543-0103-2-** 13 28 24 DF3-14S-2R26(**) 543-0090-2-** 14 30 26 038 DF3-14S-2R28(**) 543-0104-5-** 14 30 26 DF3-15S-2R26(**) 543-0091-5-** 15 32 28 034 DF3-15S-2R28(**) 543-0105-8-** 15 32 28 Note 2.The quantity for delivery of the specific No. "None" and (01) is determined per bag (100pcs.). If needed, please order productsper bag. Note 3.If the Full automatic IDC machine to hit the DF11 single core,the (20) tube packaging specification will be applied. Note 4.Order the tube packaging product, multiplying the tube packaging quantity (pieces).
Unit: mm Tube packaging Quantity 190 pieces 142 114 094 080 070 062 056 052 046 044 040 038 034 the
sApplicable Cable
Part Number
DF3-*S-2R26 DF3-*S-2R28
Applicable Cable
UL1061 AWG26 (7/0.16) UL1061 AWG28 (7/0.127)
Jacket Diameter
O0.9 to 1mm O0.9 to 1mm
sApplicable ID Connection Tool
Type Part Number Connection Type s Effective Harness Form 1DF11-Both ended, single ended 2DF11-DF11, Separation 3DF11-DF3, Separation s Effective Harness Length 100 to 2,000mm s Conduction Inspection Mechanism Installed DF3 No restriction DF4 No restriction Remarks
DF11 Single Contact Punching Full Automatic ID Machine
AM700/DF11
Connector is the specification (20). Tube packaging applied
DF3 DF4 Desktop ID Machine
DF3(4)/ID-MO
Desktop machine for small lot
A257
sCrimping Socket
[Specific No.] -* *, (* *) Blank: 100 pieces per pack
This picture shows the Contact crimped status.
Unit: mm Part Number CL No. Number of Contacts 2 3 4 5 6 7 A 06 08 10 12 14 16 B 02 04 06 08 10 12 Part Number CL No. Number of Contacts 09 10 11 12 13 14 A 20 22 24 26 28 30 B 16 18 20 22 24 26
DF3-2S-2C(**) 543-0003-8-** DF3-3S-2C(**) 543-0004-0-** DF3-4S-2C(**) 543-0005-3-** DF3-5S-2C(**) 543-0006-6-** DF3-6S-2C(**) 543-0007-9-** DF3-7S-2C(**) 543-0008-1-**
DF3-19S-2C(**) 543-0010-3-** DF3-10S-2C(**) 543-0011-6-** DF3-11S-2C(**) 543-0012-9-** DF3-12S-2C(**) 543-0013-1-** DF3-13S-2C(**) 543-0014-4-** DF3-14S-2C(**) 543-0015-7-**
8 15 18 32 14 28 DF3-8S-2C(**) 543-0009-4-** DF3-15S-2C(**) 543-0016-0-** Note1: The product's contact number indicated. Note2: The quantity for delivery of the specification No. "None" is determined per bag (100 pcs.). If needed, please order the products per bag. Note3: A quantity of "500 pieces package" and "1000 pieces package" for delivery is dealt with pieces. Order example: 500, 1000, and 1500 pieces...
sReceptacle
[Specific No.] -* *, (* *) (20) :Tin plated, Tube packaging (50) :Gold plated, Tube packaging
Note1: The product's contact number indicated
qBoard Through-hole Diameter: O0.7+0.1 +0
Unit: mm Part Number CL No. Number of Contacts 2 3 4 5 6 7 A 06 08 10 12 14 16 B 02 04 06 08 10 12 Tube Package Quantity Part Number CL No. Number of Contacts 09 10 11 12 13 14 15 A 20 22 24 26 28 30 32 B 16 18 20 22 24 26 28 Tube Package Quantity 24 pieces 21 20 18 17 16 15
DF3-2S-2DSA(**) 543-0048-6-** DF3-3S-2DSA(**) 543-0049-9-** DF3-4S-2DSA(**) 543-0050-8-** DF3-5S-2DSA(**) 543-0051-0-** DF3-6S-2DSA(**) 543-0052-3-** DF3-7S-2DSA(**) 543-0053-6-**
80 pieces DF3- 9S-2DSA(**) 543-0055-1-** 60 48 40 34 30 DF3-10S-2DSA(**) 543-0056-4-** DF3-11S-2DSA(**) 543-0057-7-** DF3-12S-2DSA(**) 543-0058-0-** DF3-13S-2DSA(**) 543-0059-2-** DF3-14S-2DSA(**) 543-0060-1-**
8 18 14 27 DF3-15S-2DSA(**) 543-0061-4-** DF3-8S-2DSA(**) 543-0054-9-** Note2: Please order the tube packaging at the multiplied tube packaging quantity (pieces).
A258
sStraight Pin Header
qBoard Through-hole Diameter: O0.8+0.1 +0 qKink Pre-fixed Effective Diameter: O0.8+0.05 +0
Unit: mm Tin Plating Gold Plating Part Number CL No. Part Number CL No. 543-0165-0 543-0017-2-01 DF3A- 2P-2DSA DF3- 2P-2DSA(01) 543-0166-2 543-0018-5-01 DF3A- 3P-2DSA DF3- 3P-2DSA(01) 543-0167-5 543-0019-8-01 DF3A- 4P-2DSA DF3- 4P-2DSA(01) 543-0168-8 543-0020-7-01 DF3A- 5P-2DSA DF3- 5P-2DSA(01) 543-0169-0 543-0021-0-01 DF3A- 6P-2DSA DF3- 6P-2DSA(01) 543-0170-0 543-0022-2-01 DF3A- 7P-2DSA DF3- 7P-2DSA(01) 543-0171-2 543-0023-5-01 DF3A- 8P-2DSA DF3- 8P-2DSA(01) 543-0172-5 543-0024-8-01 DF3A- 9P-2DSA DF3- 9P-2DSA(01) 543-0173-8 543-0025-0-01 DF3A-10P-2DSA DF3-10P-2DSA(01) 543-0174-0 543-0026-3-01 DF3A-11P-2DSA DF3-11P-2DSA(01) 543-0175-3 543-0027-6-01 DF3A-12P-2DSA DF3-12P-2DSA(01) 543-0176-6 543-0028-9-01 DF3A-13P-2DSA DF3-13P-2DSA(01) 543-0177-9 543-0029-1-01 DF3A-14P-2DSA DF3-14P-2DSA(01) 543-0178-1 543-0030-0-01 DF3A-15P-2DSA DF3-15P-2DSA(01) Note : The quantity for delivery is determined per bag (100 pcs.). If needed, please order the products per bag. Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A 06 08 10 12 14 16 18 20 22 24 26 28 30 32 B 02 04 06 08 10 12 14 16 18 20 22 24 26 28
sRight Angle Pin Header
qBoard Through-hole Diameter: O0.8+0.1 +0 qKink Pre-fixed Effective Diameter: O0.8+0.05 +0
Unit: mm Tin Plating Gold Plating Part Number CL No. Part Number CL No. 543-0179-4 543-0031-3-01 DF3A- 2P-2DS DF3- 2P-2DS(01) 543-0180-3 543-0032-6-01 DF3A- 3P-2DS DF3 -3P-2DS(01) 543-0181-6 543-0033-9-01 DF3A- 4P-2DS DF3- 4P-2DS(01) 543-0182-9 543-0034-1-01 DF3A- 5P-2DS DF3- 5P-2DS(01) 543-0183-1 543-0035-4-01 DF3A- 6P-2DS DF3- 6P-2DS(01) 543-0184-4 543-0036-7-01 DF3A- 7P-2DS DF3- 7P-2DS(01) 543-0185-7 543-0037-0-01 DF3A- 8P-2DS DF3- 8P-2DS(01) 543-0186-0 543-0038-2-01 DF3A- 9P-2DS DF3- 9P-2DS(01) 543-0187-2 543-0039-5-01 DF3A-10P-2DS DF3-10P-2DS(01) 543-0188-5 543-0040-4-01 DF3A-11P-2DS DF3-11P-2DS(01) 543-0189-8 543-0041-7-01 DF3A-12P-2DS DF3-12P-2DS(01) 543-0190-7 543-0042-0-01 DF3A-13P-2DS DF3-13P-2DS(01) 543-0191-0 543-0043-2-01 DF3A-14P-2DS DF3-14P-2DS(01) 543-0192-2 543-0044-5-01 DF3A-15P-2DS DF3-15P-2DS(01) Note : The quantity for delivery is determined per bag(100 pcs.). If needed, please order the products per bag. Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A 06 08 10 12 14 16 18 20 22 24 26 28 30 32 B 02 04 06 08 10 12 14 16 18 20 22 24 26 28
A259
sStraight Pin Header (SMT)
BPCB mounting pattern
Note :
If a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact.
[Specific No.] -* *, (* *) (20) :Tin plated tube packaging (50) :Gold plated tube packaging Unit: mm
With Boss Part Number DF3- 2P-2V(**) DF3- 3P-2V(**) DF3- 4P-2V(**) DF3- 5P-2V(**) DF3- 6P-2V(**) DF3- 7P-2V(**) DF3- 8P-2V(**) DF3- 9P-2V(**) DF3-10P-2V(**) DF3-11P-2V(**) DF3-12P-2V(**) DF3-13P-2V(**) DF3-14P-2V(**) CL No. 543-0121-4-** 543-0122-7-** 543-0123-0-** 543-0124-2-** 543-0125-5-** 543-0126-8-** 543-0127-0-** 543-0128-3-** 543-0129-6-** 543-0130-5-** 543-0131-8-** 543-0132-0-** 543-0133-3-**
Without Boss Part Number DF3D- 2P-2V(**) DF3D- 3P-2V(**) DF3D- 4P-2V(**) DF3D- 5P-2V(**) DF3D- 6P-2V(**) DF3D- 7P-2V(**) DF3D- 8P-2V(**) DF3D- 9P-2V(**) DF3D-10P-2V(**) DF3D-11P-2V(**) DF3D-12P-2V(**) DF3D-13P-2V(**) DF3D-14P-2V(**) CL No. 543-0207-8-** 543-0208-0-** 543-0209-3-** 543-0210-2-** 543-0211-5-** 543-0212-8-** 543-0213-0-** 543-0214-3-** 543-0215-6-** 543-0216-9-** 543-0217-1-** 543-0218-4-** 543-0219-7-**
Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15
A 02 04 06 08 10 12 14 16 18 20 22 24 26 28
B 8.5 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5
C 4.8 6.8 8.8 10.8 12.8 14.8 16.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8
D 8.74 10.74 12.74 14.74 16.74 18.74 20.74 22.74 24.74 26.74 28.74 30.74 32.74 34.74
Tube Packaging Quantity 41 pcs. 34 30 26 23 21 19 18 17 15 14 14 13 12
DF3-15P-2V(**) DF3D-15P-2V(**) 543-0134-6-** 543-0220-6-** Note : Please order the tube packaging product, multiplying by tube package quantity ( pcs.).
A260
sRight Angle Pin Header (SMT)
BPCB mounting pattern
BTube Size
sNumber of Contacts for Embossed Packaging Available
DF3D-*P-2H DF3D-*P-2H Numbers of Contacts (21)Tin plated (51)Gold plated (21)Tin plated (51)Gold plated With Boss Part Number DF3- 2P-2H(**) DF3- 3P-2H(**) DF3- 4P-2H(**) DF3- 5P-2H(**) DF3- 6P-2H(**) DF3- 7P-2H(**) DF3- 8P-2H(**) DF3- 9P-2H(**) DF3-10P-2H(**) DF3-11P-2H(**) DF3-12P-2H(**) DF3-13P-2H(**) DF3-14P-2H(**) CL No. 543-0107-3-** 543-0108-6-** 543-0109-9-** 543-0110-8-** 543-0111-0-** 543-0112-3-** 543-0113-6-** 543-0114-9-** 543-0115-1-** 543-0116-4-** 543-0117-7-** 543-0118-0-** 543-0119-2-** 2 3 4 5 6 7 8
KKKK KKK KKKK KKK KK K KKK KKK
9
10 11 12 13 14 15 KKKK KKK KKKKK KKK
[Specific No.] -* *, (* *) (20) :Tin plated tube packaging (21) :Tin plated embossed packaging (Note the number of contacts for marchandization.) (50) :Gold plated tube packaging (51) :Gold plated embossded packaging
Unit: mm Without Boss Part Number DF3D- 2P-2H(**) DF3D- 3P-2H(**) DF3D- 4P-2H(**) DF3D- 5P-2H(**) DF3D- 6P-2H(**) DF3D- 7P-2H(**) DF3D- 8P-2H(**) DF3D- 9P-2H(**) DF3D-10P-2H(**) DF3D-11P-2H(**) DF3D-12P-2H(**) DF3D-13P-2H(**) DF3D-14P-2H(**) CL No. 543-0221-9-** 543-0222-1-** 543-0223-4-** 543-0224-7-** 543-0225-0-** 543-0226-2-** 543-0227-5-** 543-0228-8-** 543-0229-0-** 543-0230-0-** 543-0231-2-** 543-0232-5-** 543-0233-8-** Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 A 2 4 6 8 10 12 14 16 18 20 22 24 26 28 B 8.5 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 C 4.8 6.8 8.8 10.8 12.8 14.8 16.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8 D 8.74 10.74 12.74 14.74 16.74 18.74 20.74 22.74 24.74 26.74 28.74 30.74 32.74 34.74 Tube Packaging Quantity 41 pcs. 34 30 26 23 21 19 18 17 15 14 14 13 12
15 DF3-15P-2H(**) DF3D-15P-2H(**) 543-0120-1-** 543-0234-0-** Note1: Please order the tube packaging product, multipliing the tube package quantity. ( pcs.) Note2: Please order the emboss packaging product by the reel number. (1 reel : 1000 pcs.)
A261
sIn-line Plug
[Specific No.] -* *, (* *) Blank: 1 pack
Photo: Contact inserted status
Number of Contacts Part Number CL No. A B 02 06 2 DF3- 2EP-2C(**) 543-0064-2-** 04 08 3 DF3- 3EP-2C(**) 543-0065-5-** 06 10 4 DF3- 4EP-2C(**) 543-0066-8-** 08 12 5 DF3- 5EP-2C(**) 543-0067-0-** 10 14 6 DF3- 6EP-2C(**) 543-0068-3-** 12 16 7 DF3- 7EP-2C(**) 543-0069-6-** 14 18 8 DF3- 8EP-2C(**) 543-0070-5-** Note : The specific No."None" item is delivered per bag (100 pcs.).
Number of Contacts Part Number CL No. 09 DF3- 9EP-2C(**) 543-0071-8-** 10 DF3-10EP-2C(**) 543-0072-0-** 11 DF3-11EP-2C(**) 543-0073-3-** 12 DF3-12EP-2C(**) 543-0074-6-** 13 DF3-13EP-2C(**) 543-0075-9-** 14 DF3-14EP-2C(**) 543-0076-1-** 15 DF3-15EP-2C(**) 543-0077-4-** Please order products per bag unit.
A 20 22 24 26 28 30 32
Unit: mm B 16 18 20 22 24 26 28
sIn-line Plug with Panel Lock
BPanel Cutouts
Photo: Contact insertion status
Number of Contacts Part Number CL No. A B 06 11 2 DF3AA- 2EP-2C(**) 543-0151-5-** 08 13 3 DF3AA- 3EP-2C(**) 543-0152-8-** 10 15 4 DF3AA- 4EP-2C(**) 543-0153-0-** 12 17 5 DF3AA- 5EP-2C(**) 543-0154-3-** 14 19 6 DF3AA- 6EP-2C(**) 543-0155-6-** 16 21 7 DF3AA- 7EP-2C(**) 543-0156-9-** 18 23 8 DF3AA- 8EP-2C(**) 543-0157-1-** 20 25 9 DF3AA- 9EP-2C(**) 543-0158-4-** 22 27 10 DF3AA-10EP-2C(**) 543-0159-7-** 24 29 11 DF3AA-11EP-2C(**) 543-0160-6-** 26 31 12 DF3AA-12EP-2C(**) 543-0161-9-** 28 33 13 DF3AA-13EP-2C(**) 543-0162-1-** 30 35 14 DF3AA-14EP-2C(**) 543-0163-4-** 32 37 15 DF3AA-15EP-2C(**) 543-0164-7-** Note : Specific No."None" item is delivered per bag (100 pcs.).
Unit: mm C D E 02 9.4 6.3 Note1: Applicable panel thickness is 1.6 to 1.0mm. (However, a 04 11.4 8.3 slight backlash is considered for 06 13.4 10.3 the thickness other than 1.6 08 15.4 12.3 and 1.2mm.) 10 17.4 14.3 Note2: Use the non-radius surface at 12 19.4 16.3 the hooking panel edge. 14 21.4 18.3 Note3: Contact No. indicates 1, 4, 8, 16 23.4 20.3 12, and 15. 18 25.4 22.3 20 27.4 24.3 22 29.4 26.3 24 31.4 28.3 [Specific No.] -* *, (* *) 26 33.4 30.3 Blank : 100 pcs. per bag 28 35.4 32.3 Please order products per bag unit.
A262
sIn-line Adapter with Panel Lock
BPanel Cutouts
Adapter to in-line by pushing 2 pcs. of socket from both sides No.1-No.1 connection circuit type
Unit: mm Part Number CL No. Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 A 11 13 15 17 19 21 23 25 27 29 31 33 35 B 06 08 10 12 14 16 18 20 22 24 26 28 30 C 02 04 06 08 10 12 14 16 18 20 22 24 26 D 9.4 11.4 13.4 15.4 17.4 19.4 21.4 23.4 25.4 27.4 29.4 31.4 33.4 E 6.3 8.3 10.3 12.3 14.3 16.3 18.3 20.3 22.3 24.3 26.3 28.3 30.3 [Specific No.] -* *, (* *) Blank : 100 pcs. per bag Note1: Applicable panel thickness is 1.6 to 1.0mm.(However,backlash will occur except for 1.6, 1.2mm thickness.) Note2: Please use the non-radius surface at the hooking panel edge. DF3- 2EP-2A(**) 543-0267-0-** DF3- 3EP-2A(**) 543-0268-2-** DF3- 4EP-2A(**) 543-0269-5-** DF3- 5EP-2A(**) 543-0270-4-** DF3- 6EP-2A(**) 543-0271-7-** DF3- 7EP-2A(**) 543-0272-0-** DF3- 8EP-2A(**) 543-0273-2-** DF3- 9EP-2A(**) 543-0274-5-** DF3-10EP-2A(**) 543-0275-8-** DF3-11EP-2A(**) 543-0276-0-** DF3-12EP-2A(**) 543-0277-3-** DF3-13EP-2A(**) 543-0278-6-** DF3-14EP-2A(**) 543-0279-9-**
15 28 35.4 32.3 37 32 DF3-15EP-2A(**) 543-0280-8-** Note : Specific No."None" item is delivered per bag (100 pcs.). Please order products per bag unit.
A263
sCrimping Contact for Socket
Part Number DF3-22SCF DF3-22SC DF3-2428SCF DF3-2428SC DF3-2428SCFC DF3-248SCC CL No. 543-0235-3 543-0236-6 543-0001-2 543-0002-5 543-0046-0 543-0047-3 Type Bulk contact Bulk contact Bulk contact 100 pcs. 100 pcs. 100 pcs. Quantity per embossed tape bag per embossed tape bag per embossed tape bag Gold plated Finish Reel contact 10000 pcs. per embossed tape bag Reel contact 10000 pcs. per embossed tape bag Reel contact 10000 pcs. per embossed tape bag Tin plated
qApplicable Wire (Tin Plating Annealed Copper Wire)
Conductor Size (Wire Configuration) AWG 22 (17pcs./0.16mm) AWG 24 (11pcs./0.16mm) AWG 26 (7pcs./0.16mm) AWG 28 (7pcs./0.127mm) O0.75 to O1.45mm Jacket Diameter O1.2 to O1.45mm
qRecommended Wire
UL1061, UL1007 (Note 2.)
qStrip Length
1.8 to 2.3mm
Note1: If other wires are used instead of the applicable cable, please contact HRS company. Note2: DF3-22SCF is applicable to UL1061.
sCrimping Contact for In-line Plug
Part Number DF3-EP2428PCF DF3-EP2428PC DF3-EP2428PCFA DF3-EP2428PCA CL No. 543-0062-7 543-0063-0 543-0149-3 543-0150-2 Type Reel contact Bulk contact Reel contact Bulk contact Quantity 10000 pcs. 100 pcs. 10000 pcs. 100 pcs. per reel per pack per reel per pack Gold plated Tin plated Finish
qApplicable Wire (Tin Plating Annealed Copper Wire)
Conductor Size (Wire Configuration) AWG 24 (11pcs./0.16mm) AWG 26 (7pcs./0.16mm) AWG 28 (7pcs./0.127mm) O0.75 to O1.45mm Jacket Diameter
qRecommended Wire
UL1061, UL1007
qStrip Length
1.9 to 2.5mm
Note1: If other wires are used instead of the applicable cable, please contact HRS company.
BApplicable Crimping Tool
Type Applicator Press Unit Hand Crimping Tool Part Number AP105-DF3-2428S AP105-DF3-22S AP105-DF3-EP2428P CM-105 DF3-TA2428HC DF3EP-TA2428HC DF3-TA22HC Extraction Tool DF-C-PO (A) CL No. 901-4503-3 901-4549-4 901-4508-7 901-0005-4 550-0164-5 550-0184-2 550-0257-4 550-0170-8 Applicable Contact DF3-2428SCF/SCFC DF3-22SCF DF3-EP2428PCF/PCFA ------------------- DF3-2428SC/SCC DF3-EP2428PC/PCA DF3-22SC DF3-****SCF DF3-EP****PCF
Note : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble.
A264

▲Up To Search▲

Price & Availability of DF3A-2P-2DS

	To Download DF3A-2P-2DS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .